The Quality Standard of Ceramic Tableware

Appearance quality standard:

Appearance quality is an important indicator of porcelain product grade classification. my country's current product standards divide products into three categories: high-quality products, first-class products, and qualified products. The high-quality products are equivalent to the international advanced level, the first-class products are the domestic advanced level, and the qualified products are the domestic general level. The appearance quality of top-grade products basically meets the requirements of "five without one small", that is, no spots, no slag, no color dirty, no pinholes, no glazed scratches, and small deformation. If there are spots on the product, it will always give people a feeling of uncleanness, thereby affecting appetite. First-class products and qualified products have larger requirements for allowing defects than superior products.


Dinner Plate


Lead and cadmium dissolution standard:

The amount of lead and cadmium eluted is an important safety and health index for ceramic products. The presence of lead and cadmium is due to the ceramic pigments contained in the decorative patterns on the surface of the product. The presence of lead may also be caused by the addition of lead-containing components to reduce the firing temperature of the surface glaze of the product. If the production process is not properly controlled, it is very easy to cause excessive dissolution of lead and cadmium during use. Frequent use of such products can easily cause lead and cadmium heavy metal poisoning. The national standard GB12651-2003 "Allowable limit of lead and cadmium dissolution of ceramic products in contact with food" is a national mandatory standard, and its scope of application covers all daily-use ceramic eating utensils. The standard stipulates that the leaching amount of lead and cadmium in any single product is not allowed to exceed the specified allowable value. Among them, flat products (products with a depth of less than 25mm from the lowest surface inside the product to the horizontal surface of the mouth) are specified as: lead leaching amount 7mg/l, Cadmium dissolution rate 0.50mg/l; small hollow products (products with a depth greater than or equal to 25mm from the innermost surface of the product to the horizontal surface of the mouth edge, and a volume less than 1.1L) The specified values are: lead dissolution rate 5.0mg/l, cadmium dissolution rate 0.50mg/l; large hollow products (products with a depth greater than or equal to 25mm from the innermost surface of the product to the horizontal surface of the mouth edge, and with a capacity greater than or equal to 1.1L) The specified values are: lead dissolution amount 2.5mg/l, cadmium dissolution rate 0.25mg /l.


Thermal stability standard:

Thermal stability means that the product does not crack or break during the heat exchange. The quality of thermal stability can reflect the service life of ceramic products. The greater the temperature difference between heat and cold exchange, the longer its service life. The standard generally stipulates that it is heated to 180°C and then put into water at 20°C, taken out to observe whether there is damage, this temperature does not appear to be damaged, and its service life can generally reach more than 2 to 3 years.

The above information is provided by dinner set supplier.

评论

发表评论

此博客中的热门博文

How to Choose Ceramic Tableware(Part 2)

图片
 3. From the perspective of floral decoration According to the characteristics of the flower surface, it can be divided into over-glaze, mid-glaze, under-glaze and colored-glazed porcelain, and some uncolored white porcelain. What is glaze? When glaze is applied to the ceramic body, after the kiln, the ceramic product can obtain a shiny and non-absorbent surface, that is, water. After finishing, the surface will be rough and dull, like purple clay pottery. Our company provides high quality  porcelain bowl . On-glaze color: On-glaze color ceramics are products made by sticking decals made of ceramic pigments on the glaze or directly painted on the surface of the product with the pigments, and then firing at 700℃～850℃. Because the firing temperature does not reach the melting temperature of the glaze layer, the flower surface cannot sink into the glaze, but can only stick to the surface of the glaze layer. If you touch it with your hands, the surface of the product will have unevenness,
阅读全文

What Is The Healthiest Container To Drink Water From?

图片
When you're detoxing your home, it's important to know which materials to avoid, but even more important to know which ones to choose! Glass is one of the materials that is consistently superior to plastic for two main reasons: it's better for people and the environment.   In 2013, 299 million tons of plastic were produced. This number is increasing every year. Plastic water bottles alone have increased by 39.8 billion in 14 years, with sales of 2.8 billion in 1996 and 42.6 billion in 2010.   Why not plastic? Plastics are made from a variety of chemical formulations, including endocrine-disrupting chemicals such as bisphenol A (BPA) and phthalates. Some of these chemicals, including BPA and phthalates, affect the brain, hormonal system, reproductive system, and may contribute to the development of cancer. The health effects of most chemicals have not been thoroughly tested. We do know that some of these chemicals can leach into food and beverages and contaminate the air, du
阅读全文